• ifowuniUmnxeba: 0086-28-87457505
  • i-imeyileEmail: sales@cwlbearing.com
    • sns_1 sns_2 sns_3 sns_4
    English
    ibhena_yephepha

    Iimveliso

    I-2206 K-2RS T Self Aligning Ball Bearing ene-30 mm Bore Umfanekiso obonisiweyo
    • I-2206 K-2RS T Self Aligning Ball Bearing ene-30 mm Bore

    I-2206 K-2RS T Self Aligning Ball Bearing ene-30 mm Bore

    Inkcazo emfutshane:

    Iibheringi zebhola ezizilungelelanisayo zinemigca emibini yeebhola, indlela eqhelekileyo yokugijima ejikelezileyo kwiringi engaphandle kunye neegroove ezimbini ezinzulu ezingaphazanyiswayo kwiringi engaphakathi. Zifumaneka zivaliwe. Iibheringi azinamvakalelo kwi-angular misalignment ye-shaft xa kuthelekiswa ne-housing, enokubangelwa, umzekelo, kukuphambuka kwe-shaft.

    Uhlobo lwebhore: K

    I-Taper ye-Tapered Bore 1:12


    Iinkcukacha zeMveliso

    Iithegi zeMveliso

    I-2206 K-2RS-T Self Aligning Ball BearingiinkcukachaIinkcukacha:

    Izinto eziphathekayo: 52100 Chrome Steel

    Isantya Esilinganiselweyo: 7000 rpm

    Itywina: 2RS

    T: Ikheji yenylon

    Uhlobo lweBore: K tapered bore taper 1:12

    Ubunzima: 0.265 kg

     

    Eyona iphambili Ubukhulu:

    Ububanzi bembobo (d): 30 mm

    Ububanzi obungaphandle (D): 62 mm

    Ububanzi (B): 20 mm

    Ubukhulu beChamfer (r) ubuncinci: 1.0 mm

    Uvavanyo lomthwalo oguqukayo (Cr): 15.9 KN

    Uvavanyo lomthwalo ozinzileyo (Cor): 4.6 KN

     

    UBUNINZI BOKUXHASA

    Ububanzi bomngxuma (da) ubuncinci: 35.6 mm

    Ububanzi bendlu yomqolo (Da) max.: 56.4 mm

    Ububanzi berediyasi yefillet (ububanzi): 1.0 mm

    Iibheringi zeBhola eziZilungelelanisayo K-2RS
  • Ngaphambili:
  • Okulandelayo:
    • Bhala umyalezo wakho apha uze uwuthumele kuthi

    iimveliso ezinxulumene noko

    Cofa u-enter ukuze uphendle okanye ucofe u-ESC ukuze uvale